navit-project.org
http://forum.navit-project.org/

Installation under Windows CE 5.0 fails
http://forum.navit-project.org/viewtopic.php?f=11&t=563
Page 3 of 3

Author:  DrmCa [ 01 Nov 2015, 15:08 ]
Post subject:  Re: Installation under Windows CE 5.0 fails

Tryagain,

That was very helpful, thanks a lot!
I finally figured that SirfTech was showing me COM0 at 4800 immediately and nothing was changing when pressed 'Find port and baud' because the port was already the correct one. Once set to that, Navit got a fix.

Now, I set the + and - buttons at 10,100 and 100,100 position on the screen.
They appear somewhere down 3/4 of the height and the right button is at about 2/3 of the width.
The screen of the tablet is 480x270, so their position does not make sense.
They should be down 1/3 of the height and only 1/5 of the width when using those coordinates.
What am I doing wrong?

Page 3 of 3 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/